Reverb tank enclosure (2)
11 Apr 2020
The continuing adventures of building a spring reverb...
Next up, a remote foot switch for the reverb tank. This is with the offcuts from the main tank enclosure. More dovetail joints, which worked out nicely.
The footswitch has two momentary switches to control the dry and reverb parts of the circuit, and some indicator LEDs.
I've covered the LEDs in some translucent silicone, which looks quite good, but I underestimated how long it would take to dry - so one has part of my fingerprint, and some dust embedded in it.
Connector is a mini DIN socket, and same on the main tank, to join them up.
Same oil finish as the main enclosure. Tried it out with a test fit, and everything is functioning - the remote buttons and LEDs work, and keep in sync with the main panel buttons and LEDs.